Table of Contents
Advertisement
Activating the Advanced Cable Gateway
After installing the Advanced Cable Gateway and turn it on for the first time (and each time
the modem is reconnected to the power), it goes through several steps before it can be used.
Each of these steps is represented by a different pattern of flashing lights on the front of the
modem.
Note: All indicators flash once before the initialization sequence.
If all of the lights are flashing sequentially, it means the Advanced Cable Gateway is
automatically updating its system software. Please wait for the lights to stop flashing. You
cannot use your modem during this time. Do not remove the power supply or reset the
Advanced Cable Gateway during this process.
Lights guide
Legend
ON
LED is on.
OFF
LED is off.
X
LED can be in any
state (on, off or
blinking).
User Manual ACG905 – draft
SLOW
LED is blinking slowly.
QUICK
LED is blinking quickly.
BLINKING
LED is blinking (for LINK LED only). All other LEDs
have four possible states except the LINK on,
which has only one blinking state.
Set-up
28
Advertisement
Table of Contents
