Safety Instructions - tams elektronik B-4 User Manual

English

3. Safety instructions

Risk of fire
!
The booster is cooled by a ventilating fan to prevent overheating. Thus
be careful to allow the air to flow unhindered through the ventilation
slits at the booster´s top and back surface. If the vents are blocked
components can overheat and catch fire.
Risk of electric shock

Touching powered, live components,

touching conducting components which are live due to malfunction,

short circuits and connecting the circuit to another voltage than
specified,

impermissibly high humidity and condensation build up
can cause serious injury due to electrical shock. Take the following
precautions to prevent this danger:

Only operate indoors in a dry environment.

Wiring should only be carried out when the booster is disconnected.

Only use low power for this device as described in this manual and
only use certified transformers.

Only connect the transformer in an authorised manner to the house
power supply.

Use adequetly thick cable for all wiring. Too thin a cable can
overheat.

If the layout is exposed to condensation, allow at least two hours for
drying out.
Page 6
Booster B-4