tams elektronik B-4 User Manual page 19

Booster B-4
Function
Reset
Track voltage
(output value)
Default value: 18 V
Autostarting time
after a short circuit
Default value:
4 sec.
Max. track current
(interrupting
current)
Default value: 5 A
RailCom. Default
value: active
Switching off with a
DCC points
switching command
Default value:
inactive
Value for Settings / Remarks
CV#7
8 Reset. Sets the values back to the
default values.
10 10 volts
11 11 volts
12 12 volts
... 13 ... 23 volts
24 24 volts
34 4 seconds
35 5 seconds
36 6 seconds
... 7 ... 9 seconds
40 10 seconds
42 2 amperes
43 3 amperes
44 4 amperes
45 5 amperes
51 active
52 inactive
71 active
72 inactive
73 Change over into the progr. mode.
When within 30 sec. a DCC points switching
command is set, the B-4 takes over the
corresponding points address to release the
switching off funtion.
Condition: Switching off function = "active".
English
Page 19