Setting Up Your Nuband Flash Hr; Starting Your Nuband; Switching Your Nuband Off - Nuband NU-G0020 User Manual

Setting up your Nuband Flash HR

Follow the steps below to set up your Nuband Flash HR.
1. Charge your Nuband Flash HR for 1-2 hours prior to use.
a. Remove the module from the strap, then plug the module into a
USB charge socket (either on a computer or a plug)
b. The screen will show 100% when it is fully charged.
2. Ensure the Bluetooth is enabled on your smartphone or tablet
3. When your Nuband Flash HR is charged, re-seat the module into the strap, place the Nuband on
your wrist and push the studs through the holes.
4. Install the Nuband Pro app on your smartphone or tablet (available free for Android and iOS devices
from the Google Play and Apple App Store).
5. Follow the instructions on the app to add your information and connect your Nuband to your
smartphone or tablet. (more information and screenshots are in the App guidance in this guide)
Starting Your Nuband Flash HR
Hold your finger on the screen for 10 seconds. A 4 digits code and firmware
version will show. Note this number for using when pairing your Nuband Flash HR with your phone or
tablet.
Switching your Nuband Flash HR Off
To get the most accurate fitness information from your Nuband, it's best to keep your Nuband on, but if
you need to switch it off, swipe up or down to the Function menu,
press and hold.
then swipe left to then
6