FCC Statement This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation.
Page 4
Reminder control QUICK START GUIDE 1. You should charge your Nuband for 1-2 hours prior to use. Remove module as diagram shown below and plug into USB charge socket in either a computer or a USB plug. Module should have battery symbol on screen when you charge.
Page 5
2. Install Free App: Go to App store or Play store, download this App: “Nuband Flash HR” and install it. To use the App, make sure your mobile device is connected to the Internet via Wi-Fi or 3G/4G. 3. Account Set-up: Open the “Nuband Flash HR”...
Page 6
Operation Hold finger on the screen for 10 seconds. 0000 a code Starting-up /Turn on and firmware version will appear. This is your Nuband Flash HR code. Note and use when binding device. Light up Touch the screen or turn the wrist over.
Page 7
Sport Swipe up or down to “Training” interface, click/swipe left to select the type of sports. Maximum 5 sports storage. After selecting the sports, tap the screen, the select sports icon will flash, now enter the sport. Set up sports type in APP (“Device”...
Page 8
“No” or slide up to cancel this function, the screen will return back to Schedule Swipe up or down to “Schedule” interface, click/swipe left to view the schedule set up from Nuband Flash HR APP. (“Device” “Device Setting” “Schedule”) Heart Rate...
Page 9
5. Pairing Keep your phone with Bluetooth and WiFi “on” for this step. Keep the screen lit and your Nuband Flash HR will show a flashing icon on band. When they paired, band icon will change to fix. Login to the App 【Device】 to Tap the band icon for pair.
Page 10
【Bluetooth Pairing Request】 will the App is unsuccessful, follow the steps pop up, click “Pair”, and finish below: pairing. Switch to the time screen on Nuband, check the connection status: Flashing or Fixed. If Fix icon displays on the screen: Go to Bluetooth in phone settings and forget the device.
Page 11
After successful connection, the Home page will show the connected band updated status. To review the device state or modify your band settings, Select “Device” under the APP. - 9 -...
Page 12
6. SYNC Data The band will SYNC data automatically after being connected with phone by the Nuband Flash HR App, the time and date/day of the band will be calibrated to the same as the phone. SYNC data includes: steps and calories. You can check if the data SYNC is completed successfully on the App.
Page 13
9. Sedentary Reminder Sedentary Reminder can be set in device state of the App, and time quantum can be set in the Time period setting. (“Device” “Device Setting” “Sedentary Reminder”) The time setting should match your daily routine, like 9:00a.m.-5:00p.m. instead of 9:00p.m.-5:00a.m., so it can function properly.
Page 14
10. Alarm Clock Add alarm by entering the “Alarm Setting” under device state. (“Device” “Device Setting” “Alarm Setting”) Press “Add” on the top right corner to add or edit an alarm. Up to six different alarms can be set. when it comes to the programmed time, the band will vibrate will be displayed.
Page 15
11. Camera Remote Control Activate the camera under Device state. Press “Camera” entry camera Remote control. The band will show Icon, photos can be taken by pressing the screen of the band. SMC HK 2:42 PM Back Camera - 13 -...
IOS users: Go to Settings of iPhone and search for the “Nuband Flash HR” App. In “Notifications”, make sure “Allow notifications” is turned on. Android users: On the App - Check if all notification items are allowed in Message Push.
Page 17
“Firmware Version”) state. There will be an upgrade reminder in the App when a new firmware is uploaded to the server. 14. Nuband Flash HR Parameters Battery: Built-in rechargable lithium battery Screen: OLED 0.96” inch Battery capacity: 75 mAh Waterproof level: IP67 Bluetooth: Bluetooth 4.0, working range 10 ~15m...
Page 18
When returning product under warranty, item must be returned along with original packaging and retailer receipt. Without the receipt, the warranty will be considered invalid. It is your responsibility to back any data up. If in repair or replacement, goal data is lost Nuband claim no responsibility for this.
Page 19
Nuband is a device developed to assist monitoring aspects of your health but should never replace the professional advice of your Doctor or Physician. Nuband are not a licensed medical conditions or any kind, or determining the effect of any specific exercise on a medical condition.
Page 20
Because of possible loss, we recommend insuring your Nuband, return receipt requested, when using the mail. If you do not obtain the proper receipt within a reasonable time, start a tracer through the originating post office. Please allow 2 to 3 weeks from the date we receive your package for your replacement Nuband to arrive.
Page 22
FCC Statement This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation.
Need help?
Do you have a question about the NU-G0020 and is the answer not in the manual?
Questions and answers