For Your Safety - Russell Hobbs Classic Satin RHNPC400 Owner's Manual

For Your Safety

LOCKING LID WITH EASY-GRIP HANDLE
The large, easy-to-handle Lid Lock Button effortlessly locks or
unlocks the Pressure Cooker Lid. To close, place the Lid onto the
top of the Pressure Cooker Pan so that the Lid Handle is slightly to
the right of the Pressure Cooker Pan Handle. Turn the Lid Handle
clockwise until the two Handles are together and facing you. The
Lid Lock Button locks the Lid in place. Make sure the Lid falls
below the rim of the Pressure Cooker Pan and is securely
attached onto the Pan.
To remove the Pressure Cooker Lid, pressure must be released
before opening. When pressure is completely reduced, slide the
Lid Lock Button towards you, twist the Lid counter-clockwise until
the Lid can be removed easily. Always tilt the Lid away from you
to avoid the steam. (See Operating Instructions Section in this
Owner's Manual.)
GASKET
The Gasket provides a tight seal for your Pressure Cooker. Never
use the Lid without making sure that the Gasket is properly
positioned. Do not use the Lid if the Gasket appears to be
cracked, worn or torn. In this case, you must replace the Gasket.
You can prolong the life of your Gasket by lightly coating it with a
small amount of vegetable oil after each use.
For your safety, we have incorporated into your Pressure Cooker
Lid, 4 Safety Pressure Release Valves:
• Pressure Regulator Valve with Steam Vent Tube
• Pressure Indicator Safety Valve with Pressure Lift Pin and Gasket
• 2 Safety Valves
7