Table of Contents
Advertisement
User Maintenance Instru c t i o n s
This appliance contains no user serviceable parts. Do not try to
repair it yourself. Any servicing requiring disassembly other than
cleaning must be performed by a qualified appliance repair
technician.
Always remember to unplug the unit from the wall outlet when not
in use and before cleaning.
CLEANING AND STORAGE INSTRUCTIONS
Before using for the first time and after each use, wash all Pressure
Cooker parts by hand. Always unplug unit and allow to cool
completely before cleaning.
1. Remove the Gasket from the Lid. Wash
Gasket thoroughly in hot, soapy water.
Rinse and dry thoroughly. Apply a thin
coating of vegetable oil to the Gasket
after each use. This will extend the life
of the Gasket. Slip the Gasket back in
place on the inside of the Lid.
2. The Gasket that fits inside the Lid may
become worn after many uses. If it becomes torn, cracked, cut
or visibly damaged, DO NOT USE THE PRESSURE COOKER. Call
Consumer Service at 800-233-9054 to order a new Gasket. If the
Pressure Indicator Valve Gasket becomes damaged, the Lid
must be sent in for repair or replacement.
3. Clean around the openings of the Pressure Lift Pin and Lift Pin
Gasket with warm soapy water to keep it free of grease or food
particles that could keep it from operating
properly. Rinse and dry thoroughly.
4. To expose the Steam Vent Tube, the
Pressure Regulator must be removed.
Press down and turn the Pressure
Regulator counter-clockwise to the
CLEAN position, until it stops. Lift up on
the Pressure Regulator and remove.
Hold the Pressure Cooker Lid up to the
light to make sure the Steam Vent Tube is
clear. If the Steam Vent Tube is blocked,
carefully insert the Cleaning Brush into the
Steam Vent Tube and run it gently in and
out to clear any obstructions. Wash again
with soapy water, rinse and dry thoroughly.
(See Important Safety Information.)
18
Advertisement
Table of Contents
