Table of Contents
Advertisement
16. Rinsing time setup
Entering set up
mode.
You will see LqC1
Press the 90°C (194°F) button.
Press the 75°C (167°F) or the 60°C (140°F) button until
appears in the display.
Press the Start button.
Press the 75°C (167°F) or the 60°C (140°F) button until
appears in the display.
Press the Start button. Display
(167°F) or 60°C (140°F) button to select course.
: 90°C (194°F) course
: 75°C (167°F) course
: 60°C (140°F) course
: 40°C (104°F) course
: Cold course
Press the Start button.
Display previous rinsing time.
Press 75°C (167°F)(+) or 60°C (140°F)(-) button to select
rinse cycle.
(Max 16min, Min 9min)
Press the Start button.
The machine sets up the rinsing time, then advances to
the next process automatically.
If this function is restricted originally in program,
You can move to the next step by pushing the 60°C
(140°F) button.
1. Continue to set up the next mode.
2. Stop the change of setup value and go back to ready
mode.
• Coin type - Turn on/off toggle switch.
• Coin/OPL type - Push the 90°C (194°F) button
twice.
PROGRAMMING MODE - SETUP MODE
Button
. Press 75°C
47
Display
Advertisement
Table of Contents
