Table of Contents
Advertisement
Security
Display lock
The display lock protects the device from unauthorised use. When you switch the device on or
enable the display, you are prompted to unlock the device.
The display lock becomes active after a defined time after the device has switched to idle mode.
A pattern, PIN or password is used as the display lock.
It is also possible to use a fingerprint as a display lock (
display lock set up serves as the alternative method.
Setting up a display lock when getting started (
Setting up a display lock
Settings
you have already specified a lock
None
. . . No security
Swipe
. . . The display can be unlocked by swiping over the screen
Pattern, PIN, Password
¤
Select option Require pattern to start device if the requirement is for the device to prompt
unlocking at the start
For Pattern:
¤
Draw the pattern - join together at least four dots
Confirm
For PIN:
¤
Enter at least four letters or digits
For Password:
¤
Enter at least four letters or digits
Settings for the display lock
Entering a lock screen message
Enter the text to be displayed when the screen lock is enabled, such as your name and address,
or an emergency message. All those picking up the phone can read the message without
unlocking the smartphone.
¤
Settings
Showing/hiding the pattern
Only for a display lock with pattern. When entering the pattern to unlock the device, the pattern
is shown as a line by default. You are able to change this for security reasons.
¤
Settings
visible
Users – Security
Screen lock
Select the method . . .
Continue
Users – Security
Users – Security
p. 13).
Enter the PIN, pattern or password if
Continue
Continue
Repeat the PIN
Continue
Repeat the password
Lock screen message
Enable/disable the switch next to Make pattern
Security
p. 29). In this case, the
Repeat the pattern
OK
OK
Enter text
Save
57
Advertisement
Table of Contents
