Security - Gigaset GS370 User Manual

Security

Touch & hold delay
Change the time after which "Touch and hold" is enabled on touching the screen.
Colour inversion
Swapping of colour values. For example, black text on a white screen becomes white text on
a black screen.
Colour correction
Compensate the effects of colour blindness.
More information on accessibility features is available from:
Security
Display lock
The display lock protects the device from unauthorised use. When you switch the device on or
enable the display, you are prompted to unlock the device.
The display lock becomes active after a defined time after the device has switched to idle mode.
A pattern, PIN or password is used as the display lock.
It is also possible to use a fingerprint as a display lock (
display lock set up serves as the alternative method.
Setting up a display lock when getting started.
Setting up a display lock
As long as there is no display lock set up, the function is displayed at the top when
you open the app
¤
Screen lock
or: tap
Settings
you have already specified a lock
None . . . No security
Swipe . . . The display can be unlocked by swiping over the screen
Pattern, PIN, Password
¤
Select option Require pattern to start device if the requirement is for the device to prompt
unlocking at the start
For Pattern:
¤
Draw the pattern - join together at least four dots
Confirm
For PIN:
¤
Enter at least four letters or digits
52
Settings.
Set up a display lock using the fingerprint manager (
Forget
Users – Security Screen lock
Select the method . . .
Continue
Google Help
Enter the PIN, pattern or password if
Continue
Continue Repeat the PIN
p. 26). In this case, the
p. 26)
Repeat the pattern
OK