Advertisement
POST-BUILD INSPECTIONS
Make sure the VTX is properly installed so that none of the pins are exposed (see Step 1).
CAUTION
Make sure the VTX antenna base has been securely fastened with a wrench (see Step 1).
CAUTION
Make sure the camera cables exit from the top of the camera, close to PCB (see Step 3).
CAUTION
Make sure the arms with CCW (red) and CW (black) cables are installed with matching colors diagonal
CAUTION
from each other (see Step 5).
Make sure the hole in battery plate is directly above the receiver (RX) (see Step 9)
CAUTION
Always make sure props are removed before connecting to the battery indoors.
CAUTION
Always wear safety glasses when connecting the battery.
CAUTION
16
RubiQ
BUILD PLAN
Advertisement
