Front Cover - Janome DE 5024 Servicing Manual

FRONT COVER

(TO REMOVE)
1. Remove the top cover, belt cover and base (See pageS 4, 5 and 6).
2. Set the pattern selector dial at stitch No. 18 (Triple lock straight stitch).
When you turn the pattern selector dial, you can see the position of screw (D).
3. Remove the screws (A) and (B), then loosen the screws (C). (D) and (E).
4. Push and lower the part (F) gently, then pull it toward you to replace the front cover
unit (G).
(TO ATTACH)
5. Follow the above procedure in reverse.
* When you attach the front cover, insert the zigzag mechanism pins (J) and (K)
into the recesses of the width (H), length buttons (I).
SERVICE ACCESS
7