Linear microZOTL User Manual page 5

microZOTL Preamplifier User Guide
Remote buttons and functions:
There are two modes, the normal operation mode and the Menu mode, when
configuring your unit inside the Menu functions:
The buttons are as follows:
Up and Down Buttons: These normally function as Volume Up and Volume Down.
They can be held down or used in a single step mode. In Menu mode, they function
to move up and down in the menu as displayed on the operator display.
Left and Right Buttons: In the normal operation mode these do not do anything.
They can be configured in the Left-Right Remote Button Menu to function as either
Balance controls or to control the Inputs. In the Menu mode, the Right button is
Select and the Left button is Back.
Center Button: This normally functions as a Mute function. When the unit is muted,
there are two Xs on the display. The Center button is a Mute toggle. When in Menu
Mode, the Center button functions as a Select button.
Menu Button: When in normal operation, you can hold the Menu button down for 6
seconds to toggle the Tape Monitor on or off. Pressing the Menu button in normal
operation selects the Menu Mode.
Play/Pause Button: When in normal operation the Play/Pause button toggles
through the Inputs. When in Menu mode, it also has no function assigned. Holding
the Play/Pause button for 30 seconds will pair a new Apple remote to the unit, but
this is only done in the event of replacing the remote.
5
Linear Tube Audio