Linear microZOTL User Manual page 4

Reset to Default: The amplifier controls are set to Balance = 0, Display Timeout =
Off, Home Theater Mode = None, and Display Brightness = 8, and Remote Left-Right
Arrow buttons set to Not Active.
Remote Left-Right Arrow Buttons: There are three functions that can be selected
for the Left-Right Arrow buttons as follows:
Off – the remote Left-Right arrow buttons are deactivated. Prevents
accidental selection
Balance – the remote Left-Right arrow buttons will control the balance
Inputs - the remote Left-Right arrow buttons will control the input selected
Other Controls
There are a couple of special functions:
Remote Pairing: The unit uses the Apple TV remote commercially available
through Apple and their distribution. The remote sent with the unit will already be
paired to the unit and this function does not need to be performed. In the event that
the user wants to use a different Apple TV remote, it can be paired by holding down
the remote control Play button for approximately 30 seconds until a message
appears on the display indication the remote is now paired to the amplifier.
Tape Monitor using the remote: Holding down the Menu button on the remote for
approximately 6 seconds will toggle the Tape Monitor on or off in the same manner
as using the Tape Monitor touch button on the front panel.
microZOTL Preamplifier User Guide
4
Linear Tube Audio