Wi-Fi Hotspot Mode; Dual-Network Configuration - Vivitek NovoConnect NovoEnterprise User Manual

Logging in a Wi-Fi Network with 802.1x Authentication:
When you connect to a Wi-Fi network with 802.1x authentication (for
example, radius server), you will need to enter the following fields to set
up the connection properly:
 Network SSID  Your network
 Security  802.1x Enterprise
 Choose the right settings for
o EAP method
o Phase 2 authentication
 Identity  Your username (such as
 Password  Your password
Click on button "Connect" to start the connection.

Wi-Fi Hotspot Mode

A newly unpacked NovoEnterprise starts up in Wi-Fi Hotspot mode, where you can start using it
without any entanglement with networking setup. The default SSID for this Wi-Fi Hotspot is
"NVC_XXXXX" (for example, "NVC_3F85E" in the following screenshot), where "XXXXX" is a device-
generated text string. Please note that Android mirroring (GoogleCast) is disabled in this mode. In
comparison, AirPlay mirroring has no such limitation.

Dual-Network Configuration

NovoEnterprise can even be connected to both your organization's wired network and wireless
network simultaneously. This function is extremely useful for organizations with "guest" wireless
network setup for external visitors. In such a case, NovoEnterprise's RJ45 port is connected to a wired
EMPLOYEE network for employees to securely access it; at the same time NovoEnterprise's Wi-Fi is
connected to a GUEST network to allow visitors to access it. The following graph describes such a
network setup scenario.
)
DOMAIN\John.Smith
NovoEnterprise User Manual V3.1
Page 24