Vivitek NovoConnect NovoEnterprise User Manual page 125

<edition>CORP or
<wifi-ssid>example_wifi</wifi-ssid>
<wifi-password>example_wifi_password</wifi-password>
<remote-manager-ip-address>0.0.0.0</remote-manager-ip-address>
<remote-manager-port-number>20142</remote-manager-port-number>
</NovoEnterprise>
</configuration>
2. Change appropriate setting value according to your setup environment, and delete the ones you
don't need. The following table describes each setting in details.
Key
edition*
wifi-ssid
wifi-password
remote-manager-ip-address*
remote-manager-port-number*
NOTE: Settings marked with "*" are supported in NovoEnterprise software release V2.2 and above.
3. Save your changes to the template.
Copy and install files
1. Copy NovoAutoConfig.xml file to a microSD card.
2. Insert the microSD card in the NovoEnterprise device.
3. Press the "reset" button to reboot the NovoEnterprise device.
4. After the reboot, those settings will be applied to the NovoEnterprise device.
EDU</edition>
Value (example)
CORP or EDU
(example_wifi)
(example_wifi_password)
(0.0.0.0)
20142
NovoEnterprise User Manual V3.1
Explanation
Edition value. It has to be either CORP or EDU. Refer
to Section 1.4 for more details about these two
editions.
Wi-Fi network SSID name
Wi-Fi network password
IP address of Remote Manager software
The port number used by Remote Manager software
to listen to device reporting. 20142 is the default
number. You need change it to match your Remote
Manager's setting.
Page 125