Vivitek NovoConnect NovoEnterprise User Manual page 12

Function Description
Display:
Click on Display to bring up the Display dialog.
Resolution

Select the one that matches the display screen best.

Click Save to confirm the selection, or click Cancel to abort the
selection.
Auto Config
XGA (1024x768)
WXGA (1280x800)
720p 60Hz (1280x720)
1080p 60Hz (1920x1080)
Scaling
This allows you to shrink the size of the screen.
HDMI-CEC
This allows you to enable/disable the Consumer Electronics Control
(CEC) function which allows you to command and control the
NovoEnterprise by using only another device's remote control.
Sleep Timer

Select "Do not enter sleep mode" to keep NovoEnterprise
always on even when NovoEnterprise is not being used. This is
the default setting.

Select "Enter sleep mode after idle-timeout" to have
NovoEnterprise shutdown after being idle for a designated
period of time. Select "Enter sleep mode after idle-timeout"
and then set the timer. The options are: 5 minutes, 10 minutes,
15 minutes, 30 minutes and 1 hour.

Select "Always on" to set a time period when NovoEnterprise
will power on and stay on. Select "Always on" and then specify
the start-up and shutdown time.

Click Apply to confirm the selection, or click Cancel to abort the
selection.
Settings:
Click on Settings for more device settings.
NovoEnterprise User Manual V3.1
NovoEnterprise will automatically
determine the optimal screen resolution.
You can specify your desired display
output resolution.
NOTE: NovoEnterprise supports 60Hz
display refresh rate if the display output
resolution is set to 720p or 1080p. Check
the user manual of your display or visit
the manufacturer's website for
information on how to set the display
refresh rate to 60Hz. Certain users may
experience compatibility issues if their
displays only support 50Hz display refresh
rate.
Page 12