Track / Global Controls; Track Controls; Global Controls - Arturia KEYLAB mkII User Manual

4.3. Track / Global controls

Using the industry standard Mackie HUI data language, KeyLab mkII gives you direct
access to the most frequently used commands in your recording software. The difference
between the Track Controls and the Global Controls is this:
Track control buttons perform their functions only on the currently selected track
•
Global control buttons affect the entire song or project. Their actions are
•
performed regardless of which track is selected.
The following two sections focus on the assignments that correspond to the printing on the
front panel, but a list of the assignments for each DAW preset are found

4.3.1. Track Controls

Solo: causes the current track to be featured
•
Mute: silences the current track
•
Record: arms the current track for recording
•
Read: allows automation data embedded in the current track to become active
•
Write: allows automation data to be written to the current track
•

4.3.2. Global Controls

Save: Saves your track.
•
In: Defines the start point for "punch in/out" recording
•
Out: Defines the end point for "punch in/out" recording
•
Metro: Toggles the DAW metronome on and off
•
Undo: Reverses your last action, such as deleting a track, or capturing a MIDI
•
performance.

♪: The buttons in the DAW Commands section send predetermined control messages to your
software, and cannot be repurposed within DAW mode. However, they can be assigned to send various
MIDI commands in
For a complete list of the Track / Global Control button assignments for each of the DAW
presets, click here
Arturia - User Manual KeyLab MkII - DAW mode
KeyLab mkII front panel buttons. Use the appropriate
magnetic overlay for your DAW.
Pictured: KeyLab mkII front panel buttons. Use the
appropriate magnetic overlay for your DAW.
User Edit mode [p.42].
[p.38].
here [p.38].
34