Pad Midi Note Assignments; Analog Lab/Daw/User Modes - Arturia KEYLAB mkII User Manual

2.5.2. Pad MIDI note assignments

The default note assignments of the 16 pads are shown below:
This places the pads in a commonly-used MIDI drum mapping, with the kick drum, a snare,
the hi-hats, and the cymbals, etc., all in positions that are comfortable for playing live.
They can be reassigned to any note numbers you prefer in
customizing the pads [p.64]

2.6. Analog Lab/DAW/User modes

Three large buttons below the center knob allow you to switch the KeyLab mkII between its
three major modes:
Analog Lab: Configures the knobs and faders to control parameters in Analog
•
Lab 3, as indicated by the blue text beneath each control. The center knob, the
buttons around it, and the buttons under the faders are used to filter and select
presets.
DAW: Changes most of the KeyLab mkII front panel into a control center for your
•
recording software.
User: Use the center knob to select one of 10 presets, each with its own settings
•
for every control. These presets may be
by using the
Arturia - User Manual KeyLab MkII - Overview
in the MIDI Control Center
MIDI Control Center [p.61].
User Edit mode [p.44]
[p.61].
customized from the front panel [p.42]
or by
or
14