Customised Earpieces: Clean Micro Mould/Litetip; Replace Prowax Filter - oticon Opn 1 BTE13 PP Instructions For Use Manual

Customised earpieces: Clean Micro mould/LiteTip

The earpiece should be cleaned
regularly. The earpiece has a
white wax filter*that keeps
wax and debris from damaging
the hearing aid.
Replace the filter when
clogged, or if the sound is not
normal, or contact your hearing
care professional.
IMPORTANT NOTICE
Always use the same type of wax filter as was originally supplied with
the hearing aid. If you are in any doubt about the use or replacement of
wax filters, contact your hearing care professional.
* VarioTherm Micro mould and LiteTip do not have a wax filter
26 About Startup Handling Options Tinnitus Warnings More info
Clean the vent by pressing
the brush through the
hole, twisting it slightly.
Vent
Wax filter

Replace ProWax filter

1. Tool 2. Remove
New
filter
New
filter
Remove the tool Push the empty pin
from the shell. The into the wax filter
tool has two pins, in the earpiece and
one empty for pull it out.
removal and one
with the new wax
filter.
3. Insert
Old filter
Insert the new wax
filter using the other
pin, remove the tool,
and throw it out.
27