10 POWERCORE PRESS-FIT BOTTOM BRACKET
WARNING:
Do not modify the frame. Do not face, grind or cut the bottom bracket shell. Any modification
·
will affect the bottom bracket interface and will void the warranty.
Failure to follow these instructions may result in hidden damage to the composite frameset.
·
Damage to the frameset may cause loss of structural integrity, which may result in serious
personal injury.
WARNING: Installing an unsuitable BB adapter will cause malfunction, which could result
serious injury or death.
CAUTION: There are different types of Press-Fit BB adapters. Be sure to check with the
manufacturer before selecting which BB adapter to use. If the BB adapter is not suitable,
serious personal injury may result.
CAUTION: Only proper installation will bring out the best performance and comfort in your
frameset. Since the installation of the Press-Fit BB adapter is a complicated task requiring
training and experience, only authorized Giant retailers should complete the sophisticated
process.
Installation
STEP 1:
1.
Apply neutral grease inside the frame's bottom
bracket cups.
2.
Then install the left and right-hand press-fit BB
adapters.
3.
Press-fit the adapters by using the appropriate
tool, while applying pressure evenly to both
sides so that they do not become angled.
CAUTION: When doing this, push only at the
points indicated by arrows in the illustration.
Pushing anywhere other than these points
may damage the ball races of the bearings.
13