Table of Contents
Advertisement
#58401E
TO THE STORE
QUESTIONS? PROBLEMS?
110-120V~60Hz, 2.4A
MISSING PARTS?
Tel: 1-855-838-3888
info@bestway-northamerica.com
For FAQ, Manuals, Videos Or
Spare Parts, Please Visit
www.bestway-service.com
4006936
FLOWCLEAR
TM
Sand Filter
OWNER'S MANUAL
Email: info@bestway-northamerica.com
www.bestway-global.com
www.bestway-service.com
S-S-004028
Advertisement
Table of Contents
Related Manuals for Bestway FLOWCLEAR 58401E
Summary of Contents for Bestway FLOWCLEAR 58401E
- Page 1 #58401E TO THE STORE QUESTIONS? PROBLEMS? 110-120V~60Hz, 2.4A MISSING PARTS? Tel: 1-855-838-3888 info@bestway-northamerica.com For FAQ, Manuals, Videos Or Spare Parts, Please Visit www.bestway-service.com 4006936 FLOWCLEAR Sand Filter OWNER’S MANUAL Email: info@bestway-northamerica.com www.bestway-global.com www.bestway-service.com S-S-004028...
- Page 2 S-S-004028...
- Page 3 Please examine and verify all sand filter components are present before use. Notify Bestway at the customer service address listed on this manual for any damaged or missing parts at the time of purchase.
- Page 4 D. Press the “RESET” button, the indicator light turns red, and the sand filter is ready for use. WARNING: RISK OF ELECTRIC SHOCK. THE GFCI MUST BE TESTED BEFORE EACH USE. WARNING: DO NOT USE THE PUMP IF THE ABOVE TEST FAILS. Please contact your local Bestway Aftersales Service. S-S-004028...
- Page 5 HOSE ADAPTOR FUNCTIONS Pool with Valves (Ф3.8cm) Pool Pool 1. Connect the Hose Adaptor (21) with Adapter Nut (20) to both two ends of the hoses and tighten with the hose clamps (23). 2. Attach the Hoses to the Sand filter by pressing the hose fitting on the pump port. Screw the threaded locking rings into position. 3.
- Page 6 O-ring 4. Attach the Control Valve to the Top 6. Attach the Piping to Pump Port C and to 5. Make sure Port C on the Control Valve is Tank, ensuring the O-ring is in place on aligned with Port C on the Pump. Attach the Control Valve Port C, screw the threaded the rim of the Top Tank.
- Page 7 Section IV: >1/2 in >1/2 in Complete Sand Filter Installation Connect the Fourth Hose P61318 P6680 NOTE: It is imperative to check that the hydraulic connectors are not closed. NOTE: Fig.E Ensure the Control Valve is set to the Closed function. Assemble your product referring to Fig.
-
Page 8: Troubleshooting
Probable Causes Solutions Sand Filter does not operate - GFCI broken - Contact your local Bestway Aftersales Service point to get instructions - Sand is too small - Recommend 0.45mm to 0.85mm #20 silica sand - Stop the sand filter every time set the control valve - Move the control valve from the backwash to the filter - Check if the level of the sand is between the marked “MAX”... - Page 9 30 days for hoses, fitting and accessories included in the package from the original data of purchase. To enact a warranty claim, this form must be completed and supplied with a copy of your purchase receipt to your local Bestway After Sales Center.
- Page 10 S-S-004028...
- Page 11 S-S-004028...
- Page 12 Phone: (+381) 0656644962 Phone: (+355) 682003429 Phone: (+357) 22 426803 Phone: (+389) 032386235 Fax: (+386) 056621203 (+386) 056621206 Fax: (+386) 056621203 (+357) 22 423824 E-mail: servis@bestway.si Fax: (+386) 056621203 E-mail: servis@bestway.si Fax: (+357) 22 495137 E-mail: servis@bestway.si E-mail: cyprus@bestway-service.com Argentina Malta...
Need help?
Do you have a question about the FLOWCLEAR 58401E and is the answer not in the manual?
Questions and answers