Related Manuals for Bestway Flowclear 58400
Summary of Contents for Bestway Flowclear 58400
- Page 1 #58400 Hmax 1.5m FLOWCLEAR™ SAND FILTER OWNER’S MANUAL www.bestwaycorp.com Visit Bestway YouTube channel S-S-005003 S-S-005003/21.0x28.5cm/58400EU/ 1000gal 欧规砂滤器说明书/JS-YF-2016-B-08872-英/封面...
- Page 2 • Safekeeping the instruction. For reconstruction the pool set every time, please always refer to the instructions. • If instruction is missed, please contact with Bestway or search it in website: www.bestwaycorp.com • Electric installations should follow national wiring rules. Consult a qualified electrician for any questions.
- Page 3 • Please examine and verify all sand filter components are present before use. Notify Bestway at the customer service address listed on this manual for any damaged or missing parts at the time of purchase.
-
Page 4: Specifications
SPECIFICATIONS Filter Diameter: 348mm Effective Fiter Area: 0.095m (1.02ft Max. Operating Pressure: 0.84Bar(12PSI) Working sand filter pressure: <0.45Bar(6.5PSI) Max. Water Temperature: 35°C 348mm Sand: Not included Sand Size: #20 silica sand,0.45-0.85mm 568mm Sand Capacity: Approximately 18kg PARTS REFERENCE OVERVIEW Before assembling the sand filter, take a few minutes to become familiar with all the sand filter parts. REF.NO SPARE PART NO. - Page 5 Assembly (You will need a screwdriver.) 110mm Ø8mm 1. Carefully remove all components from the package and check to ensure nothing is damaged. If equipment is damaged,immediately notify the retailer from where the equipment was purchased. 2. The sand filter should be placed on solid, level ground, preferably a concrete slab. Position the sand filter so the Ports and Control Valve are accessible for operation, servicing and winterizing.
- Page 6 P61318 P61322 Garden hose (not included) For Drain, Backwash, Rinse function STOP Before switching on, please read the manual carefully. OPERATION CONTROL VALVE OVERVIEW WARNING: To prevent equipment damage and possible injury, always switch off sand filter before changing the Control Valve function. Changing valve positions while the pump is running can damage the Control Valve, which may cause personal injury or property damage.
- Page 7 Closed: Filter: This function stops water This function is used to filter pool water flowing between the sand filter and the pool. and should be positioned here 99% of the time. Water is pumped through the sand filter, where it is cleaned and returned to the pool.
- Page 8 NOTE: • Be sure all provisions for wastewater disposal meet applicable local, state or national codes. Do not discharge water where it will cause flooding or damage. • When the Control Valve is set to the Backwash, Rinse, or Drain position, water will discharge from Port D on the Control Valve. •...
-
Page 9: Troubleshooting
Cleaning the Strainer 1. Switch off the sand filter and set the Control Valve to the Closed function. 2. Replace the Debris Screens with Stopper Plugs to prevent water from escaping. 3. Remove the Strainer Cover by unscrewing it. 4. Take out the Strainer, remove any debris. 5. - Page 10 BESTWAY limited warranty. To enact a warranty claim, this form must be completed and submitted with a copy of your purchase receipt to your local Bestway After Sales Center. Please contact your local Bestway After Sales Center before sending any documents. They will provide full instructions of what is needed for your claim.