Advertisement
Sheet # 694u – Bar code (option)
"RESET EOC" parameter.
Adjusted on "No" the device will save in
memory the readed bar code for all the
following programs, until a new bar code will
be readed.
Adjusted on "Yes" it will must flash a new bar
code before each start cycle.
In the "KEYBOARD SUFFIX" parameter
check or enter the suffix value = 13.
This suffix will be applied at the end of the bar
code reader frame to notify to the device that
the frame is ended.
13 = CR in decimal (Carriage Return)
Version 1.04a
User guide ATEQ 6th series Page 6/10
Advertisement
