Touch Pad (Advanced); Touchscreen - Panasonic CF-27 series Reference Manual

Touch Pad
(Advanced)
Function
Pan*
Scroll in various directions of a
document
(move the mouse slightly while
holding down the wheel)
Zoom*
Magnify/reduce the display of
a document.
(rotate the wheel while holding
down Ctrl )
Data Zoom*
Display or hide a document, or
perform operations to return to
or proceed with Internet Ex-
plorer.
(rotate the wheel while holding
down Shift )
Within the parentheses () are operations to follow when using an external Microsoft
IntelliMouse .
TM
*
Indicates that the movements will differ depending on the application.
CAUTION
When an external mouse or trackball with additional functions (e.g., wheel func-
tion) is connected, a part or all of the additional functions may fail to operate. To
use these additional functions, install the driver or application software of the
external device by following the procedure below. However, once the driver or
application software is installed, touch pad functions (e.g., auto scroll) and
touchscreen may not operate even if the touch pad and touchscreen are enabled
(see the procedure for "When you want to re-enable the touch pad and

touchscreen.").

1 In [Control Panel] - [Add/Remove Programs], select [touch pad/touchscreen]
from the list, press [Add/Remove...] to delete it, then press [Yes] to confirm the
deletion. If the message appears to reboot your computer, press [Yes].
2 Power off your computer (
the external mouse or trackball device to the computer.
3 Turn the power on and run the Setup Utility (
[Touch Pad] and [Touchscreen] to [Disable] and close the Setup Utility.
4 Following the operating instructions for the connected external mouse, install
the necessary driver.
When you want to re-enable the touch pad and touchscreen:
When [PS/2 Compatible Mouse Port] is displayed in [Mouse]:
Touch Pad Operation
Wheel
Operate while holding down the two buttons.
Wheel
Ctrl +
Wheel
Shift +
"Starting Up/Shutting down") and connect
page
Magnify
Reduce
®
41). In [Main] menu, set
page 7
page 7
(To next page)
6