Touch Pad (Advanced); Basic Operation - Panasonic CF-M34 Series Toughbook Reference Manual

Touch Pad
Work Surface
Right Button
Left Button
(Advanced)
Use the touch pad to move the cursor on the display and perform normal computer
operations.
NOTE
The touch pad has been designed to work only when a finger is used. Therefore,
do not use any implement on the touch pad.
The double-tapping speed of the touch pad cannot be changed.

Basic Operation

Function
Moving the Cursor
Tapping/Clicking
Double-Tapping/
Double-Clicking
Dragging
Scroll
Scroll a document
(The movements will dif-
fer depending on the ap-
plication.)
Auto Scroll* 2
Automatically scroll a
document
(move the mouse after
clicking the wheel)
Touch Pad Operation
Move the tip of your finger
lightly over the surface.
or
tapping
or
double-tapping
or
Two quick taps, but on the
second tap leaving your
finger down (applying
pressure) and moving it
on the work surface.
When a check mark is added for [Use Drag Lock] *
After the drag operation (above: left side), it is neces-
sary to determine the destination (i.e., location of drop)
by one tap. Under the condition no destination is se-
lected, do not use the standby or hibernation function.
Nothing is shown on the display, even after resuming
from the standby or hibernation mode.
In this case, the display will return after a tap or click is made.
* 1 Windows 2000 : In [Start] - [Settings] - [Control Panel] -
[Mouse] - [Tap and Buttons]
Windows XP : In [Start] - [Control Panel] - [Printers and
Other Hardware] - [Mouse] - [Tap and
Buttons]
Operate after pressing the two buttons simultaneously.
When releasing the auto scroll function:
One tap on the work surface.
clicking
double-clicking
While holding down the
button, moving your finger
on the work surface.
1
2
(To next page)
5