Table of Contents
Advertisement
Quick Links
Advertisement
Table of Contents
Subscribe to Our Youtube Channel
Related Manuals for FONESTAR MA-125Z
Summary of Contents for FONESTAR MA-125Z
- Page 1 M -125Z AMPLIFIER WITH ZONE SELECTOR INSTRUCTION MANUAL...
- Page 2 We take this opportunity to thank you for buying this product. We recommend you read the instruction manual before switching on the machine and follow the instructions that are given. Keep the manual for future reference. SECURITY AND THE ENVIRONMENT ELECTRICAL SECURITY Check that the current in the mains connection where the machine is to be installed corresponds to the power supply of the machine.
-
Page 3: Exemption Of Liability
The characteristics of the equipment and the content of the manual can change without forewarning. FONESTAR, S.A. does not assume responsibilities regarding the inappropriate use of the equipment or the information supplied in this instruction manual, and specifically disclaims any implied liability for marketability or fitness for any other use. -
Page 4: Controls And Functions Front Panel
DESCRIPTION - P.A. amplifier. - 4 selectable loudspeaker zones with independent volume control. - Phantom power and priority. CONTROLS AND FUNCTIONS FRONT PANEL 1.- INPUT 1-4 and AUX: controls for adjusting the volume from inputs 1 to 4 and the auxiliary input. 2.- BASS: strengthens or weakens the bass frequencies ±10 dB. - Page 5 2 and 3 of the XLR connector could damage the microphones. If in doubt, contact your supplier or the FONESTAR technical service.. 8.- MUTE/SEN: control for activating/deactivating the priority in inputs INPUT 1 and TEL. Turn the control clockwise to maximum and the rest of the controls will weaken automatically when a signal is detected in inputs INPUT 1 or TEL.
- Page 6 13.- 100 V zone output terminals (COM - Z1 - Z2 - Z3 - Z4): terminals for connecting the speaker lines for zones 1 to 4. To activate/deactivate the zones, use the front switches. The zone selection terminals must only be used with loudspeakers with 100 V line transformer. The total power connected in the loudspeakers must not exceed the amplifier power.
- Page 7 CONNECTION Make the connections with the amplifier and all the audio system components switched off and disconnected from the power supply. Firstly, connect the audio sources to the inputs. Connect the loudspeakers to the loudspeaker output. Use the low impedance 4 Ω output or the high impedance 100, 70 or 25 V line output, depending on the type of loudspeakers you are going to connect.
-
Page 8: Block Diagram
BLOCK DIAGRAM - 8 -... -
Page 9: Technical Specifications
TECHNICAL SPECIFICATIONS MA-125Z CHARACTERISTICS P.A. Amplifier. 4 selectable loudspeaker zones with independent volume control. Phantom power. Paging priority. POWER 180 W maximum, 120 W RMS RESPONSE 80-16.000 Hz ±3 dB DISTORSION Harmonic: < 1% INPUTS 4 balanced mics./lines, combo (XLR and 6.3 mm stereo jack) 600 Ω... -
Page 10: Warranty
2 months after being conscious of the problem. It is only necessary to contact FONESTAR if it is impossible or imposes an undue burden for them to solve it. To benefit from this warranty it is necessary to show the proof of purchase with the date clearly visible, with no corrections or crossing out. - Page 11 - 11 -...
- Page 12 www.fonestar.com...
Need help?
Do you have a question about the MA-125Z and is the answer not in the manual?
Questions and answers