System Components/Packing List - BIO RAD iCycler iQ Packing List And Installation Manual

Section 1

System Components/Packing List

The retrofit kit for the iQ Optical Module is shipped with the following components:
• iQ Optical Module
• Optical lid
• Optical system power supply
• Optical system power supply cord
• Optical Module support bracket
• Serial port cable, RS-232, male-to-female
• Parallel port cable, IEEE 1284, male-to-male, 6-feet
• Filter Installation Tool/Removal Tray
• #6 x ¼" Phillips screws (2)
• 10-32 x 7/8 socket head screws (4)
• Ball end hex driver (5/32")
• CD-ROM with iCycler iQ Software
• Optical Module Installation Guide
• Optical System Instruction Manual
• Sodium fluorescein (1mM)
• 96 well PCR plates
• Warranty Card
• Declaration of Conformity
• Halogen lamp
• Optical Quality Sealing tape
• Tape Applicator
The following are installed in the Optical Module:
• Filters (490DF20 and 530DF30)
• Filter blanks (10)
For each installation, you will need to provide a Phillips screwdriver.
1