Daily Maintenance; Error Codes & Trouble Shooting - Magner 915 User Manual

7. Daily maintenance

· Be sure to turn the main power off before attempting daily maintenance.
· Clean the coin runway and the counting sensor at least once a day with a
brush.
· Check whether the feed belt is dirty or worn. If it is dirty, clean it by using a
piece of soft cloth saturated with denatured alcohol. If it is worn, replace it with
a new belt.
· If the machine requires service or additional repair parts, please contact your
local distributor.
8. Error codes & trouble shooting
If the machine displays following error codes, please check and adjust the
machine according to the table as below:
Error code
Eb0
Ec0
E04
Reason & Solution
It is displayed when coin jamming happens.
Press CLR key one time will clear this error code. Take out the
jammed coins and then restart the machine to count. If the
machine still fails to work, please adjust the machine
according to chapter 5.3.
It is displayed when extra coin passes by the counting sensor
after the machine stops counting.
Press CLR key one time will clear this error code, then restart
counting.
It is displayed when the right side cover is removed. The
machine will also stop working for safety purpose. After you
replace the cover, press START/STOP key again, the machine
will continue to work.
10
Magner 915 User Manual