Warning! This Appliance Must Be Earthed - Kenwood HG600 Series Instructions For Use Manual

A) If your appliance comes fitted with a plug,
it will incorporate a 13 Amp fuse. If it does not fit
your socket, the plug should be cut off from the
mains lead, and an appropriate plug fitted, as
below. WARNING: Very carefully dispose of the
cut off plug after removing the fuse: do not insert
in a 13 Amp socket elsewhere in the house as
this could cause a shock hazard.
With alternative plugs not incorporating a fuse,
the circuit must be protected by a 15 Amp fuse. If
the plug is a moulded-on type, the fuse cover
must be re-fitted when changing the fuse using a
13 Amp Asta approved fuse to BS 1362. In the
event of losing the fuse cover, the plug must
NOT be used until a replacement fuse cover can
be obtained from your nearest electrical dealer.
The colour of the correct replacement fuse cover
is that as marked on the base of the plug.
B)If your appliance is not fitted with a plug, please
follow the instructions provided below:
WARNING - THIS APPLIANCE MUST BE
E L E C T R I C A L C O N N E C T I O N ( U K O N L Y )
EARTHED
IMPORTANT
The wires in the mains lead are coloured in
accordance with the following code:
Green and yellow: Earth
Blue:
Brown:
As the colours of the wires in the mains lead may
not correspond with the coloured markings iden-
tifying the terminals in your plug, proceed as fol-
lows:
The green and yellow wire must be connected to
the terminal in the plug marked with the letter E or
the earth symbol
yellow.
The blue wire must be connected to the terminal
marked with the letter N or coloured black. The
brown wire must be connected to the terminal
marked with the letter L or coloured red.
Neutral
Live
or coloured green or green and
E
L
N