Cosmos Status Monitoring - pro bel ICO-3400-2000 Technical Manual

COSMOS Status Monitoring

5
If the frame is equipped with a COSMOS controller card the following parameters will
be reported back to the COSMOS status monitoring system.
•
auto/standard switch status
•
data rate select switch status
•
no input present detect status
•
error or PLL lock status
•
local/remote control select switch status
In remote mode, the auto/standard mode select and manual data rate selection may
be controlled through COSMOS.
In addition, the module is programmed with the following information, which can be
read by the status monitoring controller:
•
module present
•
module type
•
module bar code
•
module issue no
For further details of the Pro-Bel status monitoring system please refer to the
COSMOS status monitoring manual.
8
3400
Issue 1