Table of Contents
Advertisement
Quick Links
User's Manual
Color LCD Monitor
Important
Please read this "User's Manual", and "PRECAUTIONS" (separate
volume) carefully to familiarize yourself with safe and effective usage.
• Refer to the "Setup Guide" for information on the installation /
connection of the monitor.
• For the latest product information including the "User's Manual",
refer to our web site :
http://www.eizoglobal.com
Advertisement
Table of Contents
Subscribe to Our Youtube Channel
Related Manuals for Eizo FlexScan EV2430
Summary of Contents for Eizo FlexScan EV2430
- Page 1 User’s Manual Color LCD Monitor Important Please read this “User’s Manual”, and “PRECAUTIONS” (separate volume) carefully to familiarize yourself with safe and effective usage. • Refer to the “Setup Guide” for information on the installation / connection of the monitor. •...
- Page 2 EIZO Corporation is under no obligation to hold any submitted material or information confidential unless prior arrangements are made pursuant to EIZO Corporation’s receipt of said information. Although every effort has been made to ensure that this manual provides up-to-date information, please note that EIZO monitor specifications are subject to change without notice.
-
Page 3: Notice For This Monitor
When the screen becomes dark or begins to flicker, please contact your local EIZO representative. Do not press on the LCD panel or edge of the frame strongly, as this may result in display malfunctions, such as interference patterns, etc. -
Page 4: Cleaning
When the monitor is cold and brought into a room or the room temperature goes up quickly, dew condensation may occur on the interior and exterior surfaces of the monitor. In that case, do not turn the monitor on. Instead wait until the dew condensation disappears, otherwise it may cause some damage to the monitor. -
Page 5: Table Of Contents
Controls and Functions ....... 8 3-5. Setting Orientation ........24 ● Front ..............8 ● 3-6. Showing and hiding the EIZO logo ... 24 Rear ..............9 3-7. Changing Setting Menu Display 1-3. Basic Operations and Functions ....10 Position ............25 ●... - Page 6 Chapter 6 Reference ........36 6-1. Attaching the Optional Arm ....... 36 6-2. Detaching/Attaching Stand Base ....37 6-3. Attaching/Detaching Cable Holder ... 40 6-4. Connecting Multiple PCs ......42 ● To switch among input signals .......42 ● To set input signal selection ......43 6-5.
-
Page 7: Chapter 1 Introduction
Chapter 1 Introduction Thank you very much for choosing an EIZO color LCD monitor. 1-1. Features • 24.1″ wide format LCD • Supports a resolution of 1920 × 1200 • Applicable to DisplayPort (applicable to 8 bit) The DisplayPort input receives both an image signal and an audio signal via a single DisplayPort cable. -
Page 8: Controls And Functions
1-2. Controls and Functions ● Front Setting menu Detects the movement of a person in front of the monitor (EcoView Sense function (page 1. EcoView Sense sensor 29)). 2. Ambient light sensor Detects ambient brightness (Auto EcoView function (page 28)). Displays the setting menu of the power saving function (Auto EcoView (page 28) and... -
Page 9: Rear
● Rear 10. Main power switch Turns the main power on ( ) or off ( 11. Power connector Connects the power cord. Left: DisplayPort connector / Center: DVI-D connector / Right: D-Sub mini15-pin 12. Input signal connector connector 13. Security lock slot Complies with Kensington’s MicroSaver security system. -
Page 10: Basic Operations And Functions
1-3. Basic Operations and Functions ● Basic operation of the Setting menu Displaying the Setting menu 1. Press . The Setting menu appears. Adjusting / Setting 1. Choose a menu to adjust / set with , , and then press . -
Page 11: Functions
“To adjust brightness of non-display area” (page 22) Menu Settings Orientation “3-5. Setting Orientation” (page 24) Logo “3-6. Showing and hiding the EIZO logo” (page 24) Menu Position “3-7. Changing Setting Menu Display Position” (page 25) Reset “To reset all adjustments to the default settings”... -
Page 12: Chapter 2 Adjusting Screens
Chapter 2 Adjusting Screens 2-1. Compatible Resolutions The monitor supports the following resolutions. ● Analog Input (D-Sub) Vertical Scan Resolution Applicable Signals Dot Clock Frequency 640 × 480 60 Hz 800 × 600 VESA 60 Hz 1024 × 768 VESA 60 Hz 1280 ×... -
Page 13: Setting The Resolution
2-2. Setting the Resolution When you connect the monitor to the PC and find that the resolution is improper, or when you want to change the resolution, follow the procedure below. ● Windows 10 1. Right-click the mouse anywhere on the desktop except on icons. 2. -
Page 14: Adjusting Color
2-3. Adjusting Color ● To select the display mode (color mode) This function allows easy selection of a desired mode according to monitor application. Display Modes Mode Purpose User1 Select this to define a desired set of parameter settings. User2 sRGB Suitable for color matching with sRGB compatible peripherals. -
Page 15: Adjustable Settings In Each Mode
● Adjustable settings in each mode The adjustable settings depend on the mode. (Non-adjustable or non-settable function cannot be selected.) √: Adjustable -: Not adjustable Color Mode Function User1 User2 sRGB Paper Movie Brightness √ √ √ √ √ Contrast √... -
Page 16: To Adjust Contrast
● To adjust contrast The brightness of the screen is adjusted by varying the video signal level. Adjustable range 0 to 100 Procedure 1. Choose “Color” in the Setting menu, and press 2. Choose “Contrast” in the “Color” menu, and press The “Contrast”... -
Page 17: To Adjust Gamma
● To adjust gamma Gamma can be adjusted. The brightness of the monitor varies depending on the input signal, however, the variation rate is not proportional to the input signal. To keep the balance between the input signal and the brightness of the monitor is called as “Gamma correction”. -
Page 18: To Adjust Hue
● To adjust hue This function allows you to adjust hue. Adjustable range -50 to 50 Procedure 1. Choose “Color” in the Setting menu, and press 2. Choose “Advanced Settings” in the “Color” menu, and press 3. Choose “Hue” in the “Advanced Settings” menu, and press The “Hue”... -
Page 19: Screen Adjustment
2-4. Screen Adjustment ● Digital Signal Input When digital signals are input, images are displayed correctly based on the preset data of the monitor, but if characters and / or lines appear blurred, go to “To modify blurred characters / lines” (page 21). - Page 20 Choose “Screen” from the Setting menu to perform advanced adjustments. Adjust the clock, phase and position, in this order. ● To eliminate vertical bars Procedure 1. Choose “Analog Adjustment” in the “Screen” menu, and press 2. Choose “Clock” in the “Analog Adjustment” menu, and press The “Clock”...
- Page 21 ● To correct the screen position Note • Since the number of pixels and the pixel positions are fixed on the LCD monitor, only one position is provided to display images correctly. The position adjustment is made to shift an image to the correct position. Procedure 1.
-
Page 22: Screen Size Changing
2-5. Screen Size Changing ● Screen Size Changing The image with the resolution other than the recommended resolution is displayed in full screen automatically. You can change the screen size by using the “Screen Size” function. Setting Function Full Screen Displays an image in full screen. -
Page 23: Chapter 3 Setting Monitor
Chapter 3 Setting Monitor 3-1. Adjusting Volume This function allows you to adjust the volume. Adjustable range 0 to 30 Procedure 1. Press 2. Use for adjustment. 3. Press to exit. Note • The volume for the speakers and the headphone can be set individually. 3-2. -
Page 24: Locking Operation Buttons
“Portrait” position, settings of your graphics board need to be changed. Refer to the User’s Manual of the graphics board for details. 3-6. Showing and hiding the EIZO logo When the monitor is turned on, the EIZO logo appears on the screen. You can choose to show or hide the display of the EIZO logo. Procedure 1. -
Page 25: Changing Setting Menu Display Position
3-7. Changing Setting Menu Display Position You can change the display position of the Setting menu. Procedure 1. Choose “Monitor Settings” in the Setting menu, and press 2. Choose “Menu Settings” in the “Monitor Settings” menu, and press 3. Choose “Menu Position” in the “Menu Settings” menu, and press The “Menu Position”... -
Page 26: Resetting The Monitor To The Default Settings
3-9. Resetting the Monitor to the Default Settings The setting values are reset to the default settings. Attention • After resetting, you cannot undo the operation. ● To reset the color adjustments This function only resets the color adjustments for the currently selected mode to the default settings. Procedure 1. -
Page 27: Chapter 4 Power Saving Functions
Chapter 4 Power Saving Functions 4-1. Setting Power Saving ● Monitor This function allows you to set the monitor into the power saving mode according to the PC status. When the monitor has shifted to the power saving mode, the images on the screen are not displayed. Attention •... -
Page 28: Audio Output
● Audio Output This monitor allows you to turn off the audio output from the speakers / headphone at the power saving mode. Procedure 1. Choose “Sound” in the Setting menu, and press 2. Choose “Power Save” in the “Sound” menu, and press The “Power Save”... -
Page 29: Ecoview Optimizer 2
● EcoView Optimizer 2 Using the EcoView Optimizer 2 function automatically adjusts the screen brightness according to the white level of the input signal. This function can reduce the power consumption while maintaining the brightness specified by the input signal. Procedure 1. - Page 30 5. When “On” is selected, select “EcoView Sense Settings” for setting the details. Item Setting Range Description Time 5, 30 sec Specifies the time from when a person leaves the monitor until the 1, 3, 5, 10, 15, 30, 45, “No Presence detected”...
-
Page 31: Checking The Power Saving Level
4-5. Checking the power saving level The EcoView menu allows you to check Power Reduction, CO Reduction, and Eco Performance Level. The more indicators light up representing the Eco Performance Level, the higher the power saving level attained. Example: Indicator Procedure 1. -
Page 32: Chapter 5 Troubleshooting
Chapter 5 Troubleshooting If a problem still remains after applying the suggested remedies, contact your local EIZO representative. 5-1. No picture Problem Possible cause and remedy 1. No picture • Check whether the power cord is connected properly. • Power indicator does not light. -
Page 33: Imaging Problems (For Both Digital And Analog)
(The LCD monitor backlight has a limited life span. When the screen becomes dark or begins to flicker, contact your local EIZO representative.) • If the screen is too bright, turn on Auto EcoView. The monitor detects the environmental brightness to adjust the screen brightness automatically. -
Page 34: Imaging Problems (For Digital Only)
5-3. Imaging problems (for digital only) Problem Possible cause and remedy 1. The monitor configuration is changed to • When two monitors are connected to one PC using single under the multiple monitor configu- DisplayPort, and the power to one of the monitors is ration (when DisplayPort is connected). turned off with the power button, the screen setting may be changed to the single monitor configuration. -
Page 35: Other Problems
• If the peripheral devices work correctly when the PC and peripheral devices are connected directly, please contact your local EIZO representative. • Check whether the PC and OS are USB compliant. (For USB compliance of the respective devices, consult their manufacturers.) -
Page 36: Chapter 6 Reference
Chapter 6 Reference 6-1. Attaching the Optional Arm An optional arm (or an optional stand) can be attached by removing the stand section. Please refer to our web site for the corresponding optional arm (or optional stand). http://www.eizoglobal.com Attention • When attaching an arm or stand, follow the instructions of their User’s Manual. •... -
Page 37: Detaching/Attaching Stand Base
6-2. Detaching/Attaching Stand Base Detaching procedure The stand base that was attached during setup can be detached using the following procedures. Lay the LCD monitor on a soft cloth spread over on a stable surface with the panel surface facing down. Turn the fixing screw on the stand base to detach it. - Page 38 Attaching procedure The once removed the stand base can be attached to the monitor again with the following procedures. Check that the fixing screw is firmly attached to the bottom of the stand base. Place the stand base on a stable surface. Insert the stand brace into the stand base. Stand brace Stand base Chapter 6 Reference...
- Page 39 Turn the stand brace in the clockwise direction until it clicks. Chapter 6 Reference...
-
Page 40: Attaching/Detaching Cable Holder
6-3. Attaching/Detaching Cable Holder A cable holder is supplied with this product. Use the holder to organize the cables connected to the monitor. Attaching procedure Pass the cables through the cable holder. Close the opening in the cable holder. While holding the cable holder closed, attach it onto the stand. Note •... - Page 41 Detaching procedure Close the opening in the cable holder. While holding the cable holder closed, remove it from the stand. Chapter 6 Reference...
-
Page 42: Connecting Multiple Pcs
6-4. Connecting Multiple PCs The product has multiple connections to PCs and allows you to switch to one of the connections for display. Connection examples DisplayPort D-Sub DVI-D connector connector connector Digital Digital (DVI) Analog (D-Sub) (DisplayPort) Signal cable Signal cable Signal cable (supplied FD-C39) (option MD-C87) -
Page 43: To Set Input Signal Selection
● To set input signal selection Setting Function Auto The monitor recognizes the connector through which PC signals are input. When a PC is turned off or enters the power saving mode, the monitor automatically displays another signal. Manual The monitor displays the signal from the selected connector despite the signal input. Select the input signal for display using the operation button. -
Page 44: Connection Procedure (Setup Of Usb Function)
● Connection Procedure (Setup of USB Function) 1. Connect the monitor first to a PC using the signal cable, and run the PC. 2. Connect the USB cable between the USB downstream port of the PC and the USB upstream port of the monitor. -
Page 45: Specifications
6-7. Specifications LCD Panel Size 24.1-inch (611 mm) Type TFT color LCD, LED backlight Surface treatment Anti-Glare Hard Coating Viewing angles Horizontal 178˚, vertical 178˚ (CR≥10) Dot Pitch 0.270 mm Response Time Gray-to-gray: 14 ms Horizontal Scan Analog 31 - 76 kHz Frequency Digital 31 - 76 kHz... -
Page 46: Accessories
Communication Speed 480 Mbps (high), 12 Mbps (full), 1.5 Mbps (low) Supply current Downstream: Max. 500mA/1 port ● Accessories Signal cable MD-C87 (D-Sub - D-Sub) Cleaning Kit EIZO “ScreenCleaner” For the latest information about the accessories, refer to our web site. http://www.eizoglobal.com Chapter 6 Reference... -
Page 47: Appendix
Apple, macOS, Mac OS, OS X, Macintosh and ColorSync are registered trademarks of Apple Inc. EIZO, the EIZO Logo, ColorEdge, CuratOR, DuraVision, FlexScan, FORIS, RadiCS, RadiForce, RadiNET, Raptor and ScreenManager are registered trademarks of EIZO Corporation in Japan and other countries. -
Page 48: Fcc Declaration Of Conformity
Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment. Note Use the attached specified cable below or EIZO signal cable with this monitor so as to keep interference within the limits of a Class B digital device. - AC Cord... - Page 49 03V27353A1 UM-EV2430 Copyright © 2018 EIZO Corporation. All rights reserved. 1st Edition-April, 2018...
Need help?
Do you have a question about the FlexScan EV2430 and is the answer not in the manual?
Questions and answers