Page 3
Vintec manufacturer’s warranty provided with your product. Products must be used, installed and operated in accordance with this manual. You may not be able to claim on the Vintec manufacturer’s warranty in the event that your product fault is due to failure to adhere this manual.
Page 4
WARNING: Do not expose the appliance to rain CLASS 1 LED PRODUCT WARNING: This appliance is not intended for use by young children or infirm persons unless they have been adequately super- User Manual V190SG2E-AL V150SG2E-AL...
Get to know your wine cabinet Lighting Charcoal filter Wooden shelf Sealing strip Nameplate Door handle Kick plate Control panel Lock Adjustable feet fig.1 User Manual V190SG2E-AL V150SG2E-AL...
Do not use a frame or similar. The appliance can be installed as a free- standing unit against a wall, built into a kitchen element, or lined up with other ap- pliances (figs 2-3). User Manual V190SG2E-AL V150SG2E-AL...
This device complies with relevant EU directives including Low Voltage Directive 2006/95 EEC. and Electromagnetic Compa- tibility Directive 2004/108/EC The rating/name plate provides various technical information as well as type and serial number. Max. 85 kg. User Manual V190SG2E-AL V150SG2E-AL...
4. You will need to remove the magnet on the underside of the door by depressing the clips in pulling the magnet away from the door. Also with a small Philips head screwdriver remove the Vintec logo badge and swap the magnet where the badge was and vice versa.
Page 11
If it does not, carefully heat the strip all the way round using a hair dryer. Then ease the strip outwards slightly so that it forms a tight seal against the cabinet. Be careful not to heat the strip so much that it melts! User Manual V190SG2E-AL V150SG2E-AL...
2 minutes the door alarm is activated. Single-zone setting for long- term storage For long-term wine storage, the top and bot- tom sections should both be set at 12°C. With identical settings for the top and bot- User Manual V190SG2E-AL V150SG2E-AL...
After cleaning the sealing strip, check that it continues to provide a tight seal. Dust collecting on the condenser on the rear of the cabinet, the compressor and in the compressor compartment is best removed using a vacuum cleaner. User Manual V190SG2E-AL V150SG2E-AL...
P2 is shown on the The lower sensor is disconnected Call for service. The temperature display. or short-circuited. within the entire cabinet is main- tained at the higher of the two setpoints until the fault has been corrected. User Manual V190SG2E-AL V150SG2E-AL...
If your request for assist- ance is unwarranted, e.g. if the appliance has failed as a result of a blown fuse or incorrect operation, you will be charged the costs incurred by your call for technical assistance. User Manual V190SG2E-AL V150SG2E-AL...
Page 17
Penalties may be applicable for incor- rect disposal of this waste, in accord- ance with national legislation. User Manual V190SG2E-AL V150SG2E-AL...
Page 18
The user manual should be handed over to any person who would use or handle the refrigerator whenever the refrigerator would be transferred to another location and delivered to a recycling plant. Reserving the right to alter specifications without prior notice. 0-9193127-05 User Manual V190SG2E-AL V150SG2E-AL...
Page 19
(c) ‘ASC’ means Electrolux’s authorised serviced centres; (viii) insect or vermin infestation; (d) ‘Vintec/Transtherm’ is the brand controlled by Electrolux Home Products (ix) failure to comply with any additional instructions supplied with Pty Ltd of 163 O’Riordan Street, Mascot NSW 2020, ABN 51 004 the Appliance;...
Page 20
Service and support In the rare event that your Vintec cabinet does not perform to your satisfaction, contact our dedicated support team: 1800 771 776 concierge@vintecclub.com Vintec. We are part of the Electrolux Family. To add a touch of professional inspiration to your home, visit electrolux.com.au...