Sony HT-S500RF Operating Instructions Manual page 26

Menu items
"BT >" "BT PW"
(BLUETOOTH) (BLUETOOTH
power)
"BTAAC"
(BLUETOOTH codec
- AAC)
"BTSTB"
(BLUETOOTH
standby)
"INFO"
(BLUETOOTH
device information)
"USB >" "REPT"
(Play mode)
"SYS >" "ASTBY"
(System) (Auto standby)
"IRRPT"
(IR repeater)
"VER"
(Version)
26
GB
Function
You can turn the BLUETOOTH function on or off.
"ON": Turns the BLUETOOTH function on.
"OFF": Turns the BLUETOOTH function off.
Note
When the BLUETOOTH function is set to off, the
BLUETOOTH input is skipped while selecting input by
pressing INPUT.
You can enjoy high-quality sound if AAC codec is enabled
and your device supports AAC codec.
"ON": Enables AAC codec.
"OFF": Disables AAC codec.
Note
If changing this setting, the changed setting is reflected
after the next BLUETOOTH connection.
When the system has pairing information, you can turn
the system on and listen to music from a BLUETOOTH
device, even when the system is in standby mode, by
setting the BLUETOOTH standby mode to on.
"ON": BLUETOOTH standby mode is enabled.
"OFF": BLUETOOTH standby mode is disabled.
Note
While the BLUETOOTH standby mode is on, standby
power consumption increases.
The detected BLUETOOTH device name and address
appear in the front panel display.
"NO DEVICE" appears if the system is not connected to a
BLUETOOTH device.
• "NONE": Plays back all tracks under the current folder.
• "ONE": Repeats one track.
• "FLDER": Repeats all tracks in a folder.
• "SHFFL": Repeats all tracks in a folder in random order.
"ON": Turns on the auto standby function. When you do
not operate the system for about 20 minutes, the system
enters standby mode automatically.
"OFF": Off.
You can control the TV with the TV remote control via the
Bar Speaker. For details, see "When the TV Remote Control
does not Work" (page 15).
The current firmware version information appears in the
front panel display.