WALL MOUNT TEMPLATE on a
wall by using a commercially
available adhesive tape, etc.
3
Fasten the screws into the marks
on SCREW LINE () of WALL
MOUNT TEMPLATE as the
illustration below.
297.5 mm 297.5 mm
Screws
6 mm to
7 mm
4
Remove WALL MOUNT TEMPLATE.
5
Hang the Bar Speaker on the
screws.
Align the holes of the rear of the Bar
Speaker with the screws, then hang
the Bar Speaker on the two screws.
Note
When sticking WALL MOUNT TEMPLATE,
smooth it out fully.
Mounting the Surround
Speakers on a Wall
For HT-S500RF
1
Marks
Hole on the rear of the surround speaker
2
Prepare a screw (not supplied) for
each speaker that is suitable for
the wall mount hole on the rear of
the surround speaker.
More than 30 mm
5 mm
10 mm
Fasten the screw in the wall.
The screw should protrude as
illustration.
8 mm to
9 mm
4 mm
13
GB