Sony HT-S500RF Operating Instructions Manual page 14

3
Hang the surround speaker on the
screw.
Align the hole of the rear of the
surround speaker with the screw,
then hang the surround speaker on
the screw.
For HT-S700RF
1
Prepare two screws (not supplied)
for each speaker that are suitable
for the wall mount holes on the
rear of the surround speaker.
More than 30 mm
Hole on the rear of the surround speaker
14
GB
4 mm
5 mm
10 mm
2
Fasten the screws in the wall.
The screw should protrude as
illustration.
8 mm to
9 mm
3
Hang the surround speaker on the
screws.
Align the holes of the rear of the
surround speaker with the screws,
then hang the surround speaker on
the screws.
1,000 mm