Safety Instructions - Pockethernet Manual

SAFETY INSTRUCTIONS

Safety precautions
· To prevent fire or shock hazard, avoid exposing this unit to rain or moisture.
· Do not attempt to service this unit yourself. Please refer all servicing to your distributor / retailer.
· Do not open or disassemble the device. There are no user serviceable parts.
· Do not use strong or abrasive detergents when cleaning the device.
· Indoor use only.
· Risk of fire, explosion, and burns. Do not disassemble or crush.
· Use a certified power adapter only. Voltage and current requirement for charging and operation is
5V at 1A.
Warning
· Do not use the USB and the Ethernet connector at the same time (unplug Ethernet while charging)
· The device must only be connected to a Network Environment 0 per IEC TR62101.
· Do not connect to cables that are routed outside of a building.
· Do not connect to telecommunication networks or cable distribution systems
· Risk of explosion if battery is replaced incorrectly
· Dispose of used battery according to regulations
Regulatory notices
This device complies with part 15 of the FCC Rules. Operation is subject to the following
two conditions: (1) This device may not cause harmful interference, and (2) this device must
accept any interference received, including interference that may cause undesired
operation. This Class B digital apparatus complies with Canadian ICES-003.
FCC Notice
This equipment has been tested and found to comply with the limits for a Class B digital
device, pursuant to Part 15 of the FCC rules. These limits are designed to provide
reasonable protection against harmful interference in a residential installation. This
equipment generates, uses and can radiate radio frequency energy and, if not installed and
used in accordance with the instructions, may cause harmful interference to radio
communications. However, there is no guarantee that interference will not occur in a
particular installation. If this equipment does cause harmful interference to radio or
television reception, which can be determined by turning the equipment off and on, the user
is encouraged to try to correct the interference by one or more of the following measures:
Reorient or relocate the receiving antenna. Increase the separation between the equipment
and the receiver. Connect the equipment into an outlet on a circuit different from that to
which the receiver is connected. Consult the dealer or an experienced radio/TV technician
for help. Disposal and Recycling Information When this product has reached the end of its
useful life, please dispose of it according to your local environmental laws and guidelines
and take it to a collection point designated by local authorities. Some collection points
accept products for free. The separate collection and recycling of your product at the time
of disposal will help conserve natural resources and ensure that it is recycled in a manner
that protects human health and the environment.
Disclaimer
This manual has been compiled and published covering the latest product descriptions and
2