Features - Ryobi RB101 Operator's Manual

KNOW YOUR BUFFER/POLISHER
See Figure 1.
Before using the buffer/polisher, familiarize yourself with
all operating features and safety requirements.
WARNING:
Do not allow familiarity with your buffer/polisher to make
you careless. Remember that a careless fraction of a
second is sufficient to inflict severe injury.
Your new buffer/polisher is equipped with the following

features.

STEERING WHEEL HANDLE
The buffer/polisher has a steering wheel-shaped handle.
CORD
The buffer/polisher has a 6-foot power cord.
HANDLE
FOAM PAD
FEATURES
MOTOR
HOUSING
APPLICATION BONNET
The reusable application bonnet is made of 100% terry
cloth.
POLISHING BONNET
The reusable polishing bonnet is made of synthetic tufted
material.
FOAM PAD
The foam pad is 10 in. (254 mm) in diameter.
ON/OFF SWITCH
The on/off switch is within reach of the operator's thumb.
MOTOR HOUSING
The air vent for the motor is located on top of the motor
housing.
AIR VENT
Page 8
ON/OFF
SWITCH
CORD
Fig. 1