Red Arrow FLSMDPC10BOPI Installation Instructions

EnduraLED Polycarbonate
Floodlights with PIR
Installation Instructions P .1
For models: FLSMDPC10BOPIR, FLSMDPC20BPIR,
FLSMDPC30BPIR, FLSMDPC50BPIR
This installation must be carried out by an electrician. Please read these instructions carefully
before installation. Leave a copy for the user/maintenance engineer for future reference.
Specification
• Voltage: 220V-240V
• Wattage: 10-50W
• LED: 15-75pcs of LF SMD LED
• Lumen Output: 800-4000lm
• Life expectancy: 50000 hours
• Guarantee: Two years
• IP Rating: IP65

Safety Instructions

• Ensure the power supply is switched off before
installation.
• Do not install this floodlight where the ambient
temperature may be over 45°C
• This floodlight must be mounted on a non-flammable
surface.
• Ensure adequate ventilation is allowed between
floodlight and any object above, in front or to either
side. Suggested space is 0.5m above, 0.3m to either
side & 1.0m in front.
• The floodlight can become hot during use. Allow
adequate cooling time before handling.
• This floodlight is of Class I construction and must
be earthed.
• Do not use this floodlight if it appears damaged in
any way. Broken or damaged glass must be replaced
immediately.
• This floodlight must be installed in accordance with
the current edition of the IEE Wiring Regulations.
If in doubt, contact a qualified electrician.
Maintenance Instructions
• There are no user serviceable parts in this fitting.
• Periodically clean the housing and lens with a clean damp
cloth and dry with a lint free cloth.
Red Arrow Trading
Elsworth House, Herries Road South, Sheffield,
S6 1QS

Installation Instructions

• Find a suitable location to install this product.
• Use the mounting bracket as a template to mark fixing
holes.
• Drill fixing holes and fit suitable wall plugs, and secure
floodlight in location.
• Feed the flexible cable to the required location for
termination.
• When connecting the cable to the power supply, ensure the
correct polarity is observed.
- Brown to live (L)
- Blue to neutral (N)
- Green / Yellow to earth (
• Adjust the floodlight to the desired angle and tighten the
bolts using a suitable allen / hex key.
• Switch on power supply and check floodlight operation.
PIR Specification
• 100-240V AC Power source
• 50/60Hz Power frequency
• Maximum 500W resistive load / maximum 200W inductive
load
• 90° Detection range
• Maximum eight metres (adjustable) detection distance
• Delay time adjustable between 10 seconds - 5 minutes
(5 seconds - 1 minute adjustable)
• 2~2000Lux (adjustable) Lux control
• 0.6-1.5m/s Detection motion speed
• -10°C - +40°C Working temperature
• 1-3 metres installation height
Manual Override PIR Sensor
Instructions
Technical requirements:
This lamp has two modes:
1. PIR Sensor mode:
T: 0800 195 0006
E: sales@redarrowtrading.com
)
F: 0870 043 3946
www.redarrowtrading.com