Setting The Working Mode - HP NJ5000-5G-PoE+ Getting Started Manual

Setting the working mode

The switch can operate in managed mode(the default) or unmanaged mode.
NOTE:
To change the mode, connect to the console port of the switch and execute the following
commands at the CLI:
<HP> system-view
[HP] manage-mode on
[HP] undo manage-mode on /* Unmanaged mode */
When the switch operates in unmanaged mode, you do not need to configure the switch.
•
When the switch operates in managed mode, you can configure the switch at the CLI or the Web
•
interface. HP recommends that you use the Web interface. For more information about switch
configuration, see the user guide.
/* Managed mode */
13