WARNING:
Before working inside your computer, read the safety information that shipped with your computer and follow the
steps in
Before working inside your
your
computer. For more safety best practices, see the Regulatory Compliance home page at
regulatory_compliance.
Topics:
•
Prerequisites
•
Procedure
Prerequisites
1
Remove the
computer
cover.
2
Remove the
front
bezel.
3
Follow the procedure from step 1 to step 4 in
Procedure
1
Using a plastic scribe, pry and peel the antenna modules (2) from the locations on the chassis.
2
Pull and route the antenna cables through the antenna-cable slot on the chassis.
50
Removing the antenna modules
Removing the antenna modules
computer. After working inside your computer, follow the instructions in
"Removing the wireless
www.dell.com/
card".
30
After working inside