Replacing The System Board; Procedure - Dell Inspiron 3670 Service Manual

Hide thumbs Also See for Inspiron 3670:

Table of Contents

WARNING:

Before working inside your computer, read the safety information that shipped with your computer and follow the

steps in

Before working inside your

your

computer. For more safety best practices, see the Regulatory Compliance home page at

regulatory_compliance.

NOTE:

Your computer's Service Tag is stored in the system board. You must enter the Service Tag in the BIOS setup program

after you replace the system board.

NOTE:

Replacing the system board removes any changes you have made to the BIOS using the BIOS setup program. You must

make the appropriate changes again after you replace the system board.

Topics:

•

•

Post-requisites

Procedure

NOTE:

To ensure that cables are connected to the correct system board connectors, see

NOTE:

Depending on the configuration ordered your computer may have up to two 2.5-inch hard-drives installed. If only one

hard-drive is installed skip step 9 or step 11 where applicable.

Slide the edge of the system board into the front-I/O slot on the chassis and lower the system board into the chassis.

Align the screw holes on the system board with the screw holes on the on the chassis.

Replacing the system board

computer. After working inside your computer, follow the instructions in

After working inside

www.dell.com/

"System board

components'.

Table of Contents

Show Quick Links

Table of Contents