WARNING:
Before working inside your computer, read the safety information that shipped with your computer and follow the
steps in
Before working inside your
your
computer. For more safety best practices, see the Regulatory Compliance home page at
regulatory_compliance.
Topics:
•
Prerequisites
•
Procedure
Prerequisites
Remove the
computer
cover.
Procedure
1
Disconnect the optical-drive data cable and power cable from the optical-drive assembly.
2
Remove the two screws (M2x2) that secure the optical-drive assembly to the chassis.
3
Slide and remove the optical-drive assembly from its slot on the chassis.
4
Insert a pin into the optical-drive emergency eject pinhole to release the optical-drive tray.
5
Gently pull to open the optical-drive tray from the optical-drive assembly.
32
Removing the optical drive
Removing the optical drive
computer. After working inside your computer, follow the instructions in
18
After working inside
www.dell.com/