Table of Contents
Advertisement
Submenu
Reset Current
Returns all of the adjustments you've made for the selected Picture Mode
Picture Mode
(including preset modes, User 1, and User 2) to the factory preset values.
DISPLAY menu
Submenu
Aspect Ratio
Image Position
Overscan
Adjustment
Phase
H. Size
In the following illustrations, the black portions are inactive areas and the
white portions are active areas.
•
Auto
15:9 picture
•
4:3
4:3 picture
•
16:9
16:9 picture
•
16:10
16:10 picture
Displays the Image Position window. You may use the directional arrow keys
on the projector or remote control to adjust the position of the projected picture.
The values shown on the lower position of the window change with every key
press you made.
This function is only available when the PC signal is selected.
Conceals the poor picture quality in the four edges.
The greater the value, the more portion of the picture is concealed while the
screen remains filled and geometrically accurate. Setting 0 means the picture
is 100% displayed.
Adjusts the clock phase to reduce picture distortion.
This function is only available when the PC signal is selected.
Adjusts the horizontal width of the picture.
This function is only available when the PC signal is selected.
Functions and Descriptions
Functions and Descriptions
Scales a picture proportionally to fit the projector's
native resolution in its horizontal or vertical width.
This makes the most use of the screen and
maintains the aspect ratio of a picture.
Scales the picture so that it is displayed in the
center of the screen with a 4:3 aspect ratio.
Scales a picture so that it is displayed in the center
of the screen with a 16:9 aspect ratio.
Scales a picture so that it is displayed in the
center of the screen with a 16:10 aspect ratio.
Menu Functions
23
Hide quick links:
Advertisement
Table of Contents
