Introduction - Hunter Solar Sync Owner's Manual

Introduction

The Solar Sync is a sensor system that, when connected to
a compatible Hunter controller, will automatically adjust
your controller watering based upon changes in local climate
conditions. The Solar Sync utilizes a solar and temperature
sensor to measure on-site weather conditions used to
determine evapotranspiration (ET), or the rate at which
plants and turf use water. In addition, the Solar Sync sensor
includes a Hunter Rain-Clik® and Freeze-Clik® sensor that
will shut down your irrigation system when it rains and/or
during freezing conditions.
Need more helpful information on your product? Find tips on installation, controller programming, and more.
hunter.direct/solarsynchelp
2
The result is a new water-efficient irrigation product that
promotes water conservation and healthier plants. You
simply program your controller like you normally would, and
the Solar Sync takes over from there, eliminating the need
to manually adjust your watering schedule.
1-800-733-2823