Table of Contents
Advertisement
DC CURRENT (Auto ranging)
Range
AUTO RANGE 4A
40A
AUTO RANGE 200A
400A
FREQUENCY (Auto ranging)
Range
10 ~ 1M Hz
1M ~ 10M Hz
Input Voltage Limit: Max.250V(<1M Hz) Max. 10V(>1M Hz).
Non-Contact AC VOLTAGE Detection(NCV)
Special LED Lighting is indicating once AC>100V.
CONTROL BUTTON DESCRIPTION
HOLD BUTTON
When this button is pushed, LCD will show the last reading, and "H" symbol will appear
till pushed again. Data holding will be cancelled automatically when the function switch
is rotated.
FUNC BUTTON
Push this button to select ACA/DCA, ACV/DCV,
function switch is set at A,V, or
REL/ZERO BUTTON
When this button is pushed, LCD will show the relative reading or Zero reading till
pushed again.
OPERATION INSTRUCTION
AC/DC VOLTAGE MEASUREMENT
Connect the BLACK test lead to the COM jack and the RED to the VΩ jack.
Set the function switch at V position, connect test leads across the source or load
under measurement.
Push "FUNC" button to select AC or DC Mode, and then the symbol ~ or
is shown on LCD.
Read LCD display. The polarity of RED test lead will be indicated when making
a DC measurement.
Resolution
Accuracy
1mA
±(3.0% of rdg + 5dgts)
10mA
100mA
±(2.5% of rdg + 7dgts)
1A
Resolution
Accuracy
1 Hz
±(1.0% of rdg + 2dgts)
1A
±(1.5% of rdg + 4dgts)
position.
measuring function when the
5
Advertisement
Table of Contents
