Motorola PMPN4286 User Manual page 57

AS000111A01
Figure 28: Securing AS000111A01 Charging Pockets to
1. Plug in the USB connector and harness connector to the
receptacles on the base.
Note: USB or harness connector may not be available on some of the
Charger Pocket. Plug in the available connectors to the base.
2. Slot in the Charging Pocket to the base and ensure the Charging
Pocket is flushed into the Multi-Unit Charger. Affix the Charging
Pocket screw.
Multi-Unit Charger Base
55
AS000111A01
USB Receptacle
Harness Receptacle