Motorola PMPN4286 User Manual page 20

Table 7: Charging IMPRES 2 or IMPRES Batteries -
Status
Standby (Battery is
waiting to rapid charge)
Table 8: Charging IMPRES 2 or IMPRES Batteries - Calibration
Status
Charger Powers On
Battery Detected
Requesting IMPRES
Battery Calibration
• Calibration is disabled in
charger.
• Charging Battery until
OK is selected or time-
out.
Rapid Charging (Request
for Calibration time-out)
Charged to 90% or more
Calibration Not Required (Cont.)
Pocket Display
Warning:
HOT BATTERY
WAITING TO CHRGE
or
COLD BATTERY
WAITING TO CHRGE
or
VERY LOW BATTERY
WAITING TO CHRGE
Required, but Not Enabled
Charger Display
IMPRES 2
CHARGER
IMPRES 2
BATTERY
or
IMPRES
BATTERY
Warning:
ENABLE BATTERY
CALIBRATION?
• Press OK to
enable Calibration.
• Ignore for normal
charging
(message
disappears after
one minute).
RAPID CHARGE
TRICKLE CHARGE
18
LED Indicator
Flashing Amber
LED Indicator
Green for approximately one
second
Battery requires Calibration, but
Calibration is disabled in charger:
Alternating Amber/
Green for four seconds
Steady Red
Steady Red
Flashing Green