Wake On Lan - Hitachi Compute Rack CR 210H User Manual

Wake On LAN

This section describes the Wake On LAN feature.
Overview of the remote power-on
The Wake On LAN function is a function to turn on the power to system unit
through a network. The system unit, if turned off, can be turned through a
remote operation by transmitting special packets from the system unit for the
administrator or from a client.
Support conditions for the Wake On LAN
The Wake On LAN function is supported under the following conditions.
Supported OS: Windows Server 2008 R2

Supported LAN devices: Onboard LAN controller 1

Only network interface connector 1 on the rear of the system unit is available.
Figure 3-14: Network interface connector 1
Network interface connector 2, management interface connector, optional
LAN mezzanine and LAN card are not supported.
3-18
You can use a remote power-on operation by using the onboard remote
management function only on the Web console.
Network interface connector 1
Onboard LAN controllers (network interfaces) are displayed on the
device manager, as follows:
Onboard LAN1: PCI bus 6, device 0, function 0

Onboard LAN2: PCI bus 6, device 0, function 1

System Unit Functions
Hitachi Compute Rack 210H User's Guide