Time2 HSIP2 User Manual page 17

Motion Detection – Ensure this is turned on to activate the motion
detection. Whilst the camera is turned on if any movement is detected, the
built in motion detector will trigger an alarm. An alert will be sent to your
phone.
Motion Detection Sensitivity – This can be used to adjust the sensitivity
of the camera. Please note the lower the number the more sensitive the
camera is.
Audio Detection – Ensure this is turned on to activate the audio
detection. Whilst the camera is turned on if any sound is detected, the built
in sound detector will trigger an alarm.
Audio Detection Sensitivity – This can be used to adjust the sensitivity
of the camera.
Alarm preset position linkage – Click the dropdown box and choose a
preset position you would like the camera to move too once the motion is
detected. Please note you will need to set a preset position for this setting
to work. See preset position for more information.
Alarm Mail Notification – Ensure this is turned on to activate this feature
which allows for an email notification to be sent as soon as the motion is
triggered. Please note you will need to set this up for this to setting to
work. See Email settings for more information.
Upload pictures count – Activate this feature to receive images ocne the
motion detection alarm has been triggered.
Alarm Video – Ensure this is turned on for the camera to record a
compressed video onto the Micro SD card once the alarm has been
triggered.